Introduction:
Roll Die Printing And Punching Machine based on international advanced technology, it’s widely used in printing, packaging and paper products industries. It adopts micro-computer, human-computer control interface, servo positioning, alternating current frequency converter, manual pneumatic lock plate, photoelectric correcting deviation system, centralized oil lubrication. All the key parts and controls of the machine are imported.
Machine Detailed Pic
Strong Structure
Lubri cation System
Photoelectric Sensor
Die cutting mold
Electric Configuration:
PLC | Taiwan Delta |
Servo Motor | Taiwan Delta |
Touch screen | FLEXEM |
Frequency converter | Taiwan Delta |
Switch | Taiwan Delta |
Main motor | Taiwan |
Feeding motor | Taiwan |
Contactor | Eaton |
Relay | Weidmuller |
Button | Eaton |
Characteristics：
1) Adopt the anilox roller to spread ink.
2) Unwinding tension is controlled by automatic tension controller from Japan Mitsubishi.
3) Each printing unit adopt 360°for registration.
4) Each printing unit have one IR dryer
5) The rubber roller can break away automatically while parking, and run at a low speed in order to avoid ink being dry.
6) The main motor is adopted the import stepless regulation of frequency conversion.
7) Unwinding, web guiding, printing, IR drying and punching can be finished in one process
Printing Unit Parameters:
Web width | 850mm |
Print width | 840mm |
Unwind Diameter max | 1200mm |
Press Speed max (Production speed depending on process, job etc. | 80m/min |
Gear Pitch | 1/8” (3.175mm) |
Flexo Print Units (IR dryer): | 3 |
Min.Max repeat Print Cylinder | 10” - 22.5” |
Web Guiding: number | 1 |
Overprint precision | ±0.15mm |
Machine weight | 4500kg |
Paper Cup&Bowl Paper Box Paper Plate Paper Lid Cutted Paper Others